New technical note AGE-PN-001: reproducible benchmark for WDM stability See evidence
Quantum Security

Integrity, monitoring and operational assurance. For quantum technologies.

Quantum communication and computing depend on finely controlled physical processes. Optical drift, temporal-mode distortion, parameter deviations and unauthorized configuration changes alter the behaviour and reliability of quantum hardware. AGE is investigating a software layer that watches over that physical integrity, extending its photonic characterization, estimation and compensation towards operational security.

The line

A third scientific pillar inside AGE.

Quantum Security does not create a new identity: it reuses the characterization, estimation and verification engine AGE already builds and points it at the physical integrity of quantum systems.

current line

Photonic stability

Characterization, estimation and drift compensation in integrated photonic circuits, with open evidence and citable software.

current research

Quantum systems and temporal modes

Minimum-norm receivers, control realizability and temporal-mode dynamics, with manuscripts and numerical benches.

new R&D line

Quantum Security

Operational integrity, anomaly detection and physical monitoring of quantum systems, published as R&D and not as a validated product.

What AGE investigates

  • Detection and estimation of physical deviations against a validated baseline.
  • Monitoring of calibration and configuration parameter integrity.
  • Temporal-mode and receiver selectivity diagnostics.
  • Traceability of software, configurations and calibration packages.

What AGE does not claim

  • It is not a cryptographic system or a quantum-security mechanism.
  • It does not replace protocol security proofs or post-quantum cryptography.
  • It does not guarantee the security of any infrastructure.
  • A detected anomaly does not, by itself, demonstrate an attack.
Quantum communication · QKD

Theoretical protocol security does not cover the physical implementation.

A QKD link can execute the mathematical protocol correctly and still present vulnerabilities in sources, detectors, optics or control electronics. The ETSI and ISO/IEC frameworks treat optical component characterization, implementation evaluation and security testing as part of the life cycle of a QKD system.

The connection with current AGE research is direct: when the temporal profile of the emitted photon changes, the receiver response changes with it — detection efficiency, selectivity, quantum bit error rate (QBER) and link stability. AGE’s minimum-norm receiver and physical realizability tools provide a framework for studying that effect.

A future application of the line is a module dedicated to monitoring the physical integrity of the optical channels of QKD systems.

i

An optical anomaly is not an attack. It can be an environmental disturbance, a component failure or deliberate tampering. AGE detects deviations and provides information to investigate their origin; attributing an attack requires an explicit threat model, reproducible attacks and measurable false-positive rates.

Observable problemAGE contribution
Thermal drift of componentsDeviation detection and estimation
Optical parameter alterationParameter integrity monitoring
Temporal-mode distortionReceiver selectivity diagnostics
Transmitter–receiver mismatchTemporal compatibility assessment
Anomalous channel changesUnexpected behaviour detection
Detector degradationParameter and response monitoring
Quantum computing

Four capabilities to watch circuits and calibrations.

Optical phases, intensities, modulation parameters, emission timing, couplings and calibration configurations must stay within their margins. An uncontrolled disturbance — not necessarily an attack — is enough to alter the computational behaviour of a photonic circuit.

01

Integrity Monitoring

Check that the parameters observed during execution stay within the defined margins.

02

Anomaly Detection

Identify deviations from the expected behaviour of a validated circuit.

03

Calibration Integrity

Verify that calibration and compensation settings correspond to an authorized configuration.

04

Operational Verification

Compare the observed behaviour against a reproducible reference to identify unexpected modifications.

!

Detecting a deviation does not imply malicious manipulation. Claiming attack detection requires threat models, reproducible attack campaigns and documented false-positive and false-negative rates.

Photonic Integrity

An integrity engine with two operating modes.

The conceptual architecture connects photonic hardware with a security and reliability report through telemetry, characterization and an integrity engine covering drift detection, anomalies, integrity verification and temporal analysis.

01hardware

Photonic hardware

Circuits, emitters, receivers and detectors.

02telemetry

Telemetry and characterization

Phases, intensities, timing, temperatures and monitoring signals.

03engine

AGE integrity engine

Drift detection, anomalies, parameter integrity and temporal-mode analysis.

04report

Security and reliability report

Deviations, uncertainty, alerts and traceability.

Mode 1 · Normal operation

  • Authorized diagnosis and compensation.
  • Corrections within the limits approved for the platform.
  • Standard operation logging.

Mode 2 · Security monitoring

  • Detection, logging and evidence preservation.
  • Notification without silent automatic correction.
  • Correcting an altered parameter without logging the event could conceal tampering.

This separation between correcting and watching is the core differentiator of the line: in a security context, silent automatic correction is a liability, not a feature.

Secure AGE Infrastructure

Standardized post-quantum cryptography for AGE software.

AGE does not develop new cryptographic algorithms. The line studies how to incorporate standardized signatures and authentication — such as ML-DSA (FIPS 204) — into the software infrastructure and its records.

  • Digitally signed software releases.
  • Authenticated per-platform configurations.
  • Calibration packages protected against modification.
  • Verifiable data provenance.
  • Records with demonstrable integrity.
  • Authenticated inter-module communication.
NIST referenceNIST · August 2024
  • FIPS 203 — ML-KEM · key establishment.
  • FIPS 204 — ML-DSA · digital signatures.
  • FIPS 205 — SLH-DSA · hash-based signatures.
Research & Validation

Research before security claims.

Every proposed capability is evaluated against explicit threat models, measurable detection criteria and reproducible experiments. The roadmap prioritizes independent validation, documented limitations and transparent reporting.

01

LAB 01 · Coherent perturbations

Introduce controlled phase and intensity perturbations and check whether the bench spots deviations from expected behaviour.

02

TM-01 · Temporal integrity

Alter the temporal mode between transmitter and receiver on the 30 m link and study its effect on selectivity and detection.

03

Photonic drift · Anomalies

In long records, separate normal environmental drift from deviations that require investigation.

04

QKD · In development

Modeling of link parameters, source and receiver anomalies and QBER variations, with published attack scenarios clearly separated from benign perturbations.

References AGE is studyingactive study
  • ETSI ISG-QKD — optical component characterization, implementation evaluation and penetration testing; GS QKD 016, Common Criteria Protection Profile.
  • ISO/IEC 23837-1:2023 — security requirements and evaluation methods for QKD modules, under the ISO/IEC 15408 framework.
  • NIST PQC — FIPS 203/204/205, the reference for post-quantum signatures and key establishment.
  • QuIC and ECCC — the European quantum technology and cybersecurity ecosystem.
Roadmap

Five stages, from monitoring to independent validation.

01stage 1

Photonic integrity monitoring

Use the current code to watch for deviations, drift and physical anomalies. Goal: separate normal behaviour from unexpected disturbances.

02stage 2

Quantum communication security research

Adapt temporal-mode and receiver models to QKD scenarios. Goal: assess how specific perturbations affect the system response.

03stage 3

Quantum hardware integrity

Calibration, configuration and circuit behaviour verification. Goal: traceability and deviation detection.

04stage 4

Secure AGE infrastructure

Post-quantum signatures, release authentication and record protection. Goal: harden the integrity of the AGE software itself.

05stage 5

Independent security validation

External evaluation with labs and security specialists. Goal: validate the capabilities against threat models and reproducible attacks.

Quantum Security

Measuring the integrity of quantum systems.

The line is published as research and development, not as a validated commercial product. We are looking to collaborate with QKD groups, implementation-security specialists, photonics labs, detector manufacturers and quantum infrastructure companies.