Test bench for the 30 m link
Ten lab scenarios on emission, absorption and zero-forcing receivers for microwave temporal modes. Every figure carries its origin: the ETH experiment, the AGE manuscript, or our own calculation with the ETH modes.
Realizability oscilloscope
|h|² against the emission limit ρ(1 − F) and the absorption limit ρF. Blue: the emission control does not exist. Red: the absorption control does not exist.
Where each minimum ρ is decided
|h|²/(1 − F) for emission and |h|²/F for absorption. Each minimum ρ is the maximum of its curve within the tail threshold; the dots mark where it is reached.
Emission control g̃(τ)
g̃ = (ḣ + ρh/2)/√(ρ(1 − F) − h²). The diamonds mark the zeros of the drive: the plateaus of a truncation measurement.
Absorption control g̃_abs(τ)
The absorption control is the emission control of the time-reversed mode. Where it drops to zero for no reason, the control does not exist.
Minimum ρ vs mixing θ
Emission and absorption are mirror images: ρ_abs(θ) = ρ_emit(−θ) when the modes have different parities.
Minimum ρ vs tail threshold
Requirements set in the tail rise towards 1 as more tail is included. Absorbing (f₀ + f₁)/√2 is set at the centre and does not move.
Asymmetry ρ_abs − ρ_emit
Zero for same-parity mixtures (f₀ and f₂); opposite sign on each side of θ = 0 when the parities differ.
Drive zero of f₁ vs ρ
Plateau position in ns for the chosen Γ. The narrower the node, the earlier it falls relative to the mode's node (t = 0).
Tests of the engine and of the quiz figures
Auditor's findings
Engine
Hypotheses and limits
Parameters and their origin
Export and seal this experiment
JSON with the configuration, the minimum ρ values and the drive zeros, and its SHA-256 fingerprint to pre-register a prediction.