AGE · LAB 01 · Photonic Circuit Laboratory

—

Por qué funcionaWhy it works

Siete resultados que sostienen el laboratorioSeven results behind the lab

REF = resultado establecido en la literatura; VER = verificado numéricamente en este laboratorio; HEUR = lectura heurística para AGE, no un resultado demostrado.REF = established result in the literature; VER = verified numerically in this lab; HEUR = heuristic reading for AGE, not a proved result.

1

El acoplador direccionalThe directional couplerREF

MDC = √(1−L) · [[ √(1−η), i√η ], [ i√η, √(1−η) ]]

η es la fracción de potencia que cruza. La i en la diagonal secundaria es obligatoria: sin ese desfase de 90°, la matriz no sería unitaria y la energía no se conservaría.η is the power fraction that crosses over. The i on the off-diagonal is mandatory: without that 90° shift the matrix would not be unitary and energy would not be conserved.

2

Unitaridad = conservación de la energíaUnitarity = energy conservationREF

U†U = I  ⟺  |a1|² + |a2|² se conservais conserved

Con pérdidas, U deja de ser unitaria: sus valores singulares bajan de 1 y miden cuánta luz se pierde en el mejor y en el peor caso de entrada. El panel de matrices los muestra en directo.With loss, U stops being unitary: its singular values drop below 1 and measure how much light is lost for the best and worst input. The matrix panel shows them live.

3

El interferómetro Mach-ZehnderThe Mach-Zehnder interferometerREF

UMZI = MDC · diag(eiφ, 1) · MDC  ⟹  P1 = sin²(φ/2),  P2 = cos²(φ/2)

Con acopladores 50:50, la diferencia de fase entre brazos decide a qué salida va la luz. Es un conmutador y, con φ intermedia, un divisor ajustable.With 50:50 couplers, the phase difference between arms decides which output the light goes to. It is a switch and, at intermediate φ, a tunable splitter.

4

Visibilidad y pérdidas desigualesVisibility and unequal lossVER

V = (Pmax − Pmin)/(Pmax + Pmin) = 2√T / (1 + T),   T = 10−L/10

Para un MZI 50:50 con una pérdida de L dB en un brazo. Invertida, la fórmula convierte una visibilidad medida en la pérdida escondida: 3 dB dan V = 0,943, y el laboratorio lo reproduce a precisión de máquina.For a 50:50 MZI with a loss of L dB in one arm. Inverted, the formula turns a measured visibility into the hidden loss: 3 dB gives V = 0.943, and the lab reproduces it to machine precision.

5

Acopladores imperfectos limitan la extinciónImperfect couplers limit extinctionVER

Pbar,min = (√((1−η1)(1−η2)) − √(η1η2))²,  nula solo sizero only if η1 + η2 = 1

Con dos acopladores de 42 % la salida bar nunca baja de 0,0256: 15,9 dB de extinción, por mucho que se ajuste la fase. Para que conmuten las dos salidas hace falta η₁ = η₂ = 0,5. Con un acoplador ajustable añadido, el banco no pasa de 21,9 dB. Con dos, uno antes y otro después y ambos en 50:50, el conjunto vuelve a conmutar por completo: es la compensación con ajustes redundantes de Miller (2015).With two 42 % couplers the bar output never drops below 0.0256: 15.9 dB extinction, however the phase is tuned. For both outputs to switch you need η₁ = η₂ = 0.5. With one added tunable coupler the bench tops out at 21.9 dB. With two, one before and one after and both at 50:50, the assembly switches fully again: this is Miller’s (2015) compensation with redundant tuning.

6

Dos fotones: efecto Hong-Ou-MandelTwo photons: the Hong-Ou-Mandel effectREF

P11 = |U11U22 + U12U21|² = (1 − 2η)² para un acoplador sin pérdidasfor a lossless coupler

Dos fotones idénticos que entran uno por cada puerto en un 50:50 salen siempre juntos: la coincidencia se anula. Es el permanente de la matriz, no el determinante, y es la prueba más directa de que dos modos temporales son indistinguibles.Two identical photons entering one per port of a 50:50 always leave together: coincidences vanish. It is the matrix permanent, not the determinant, and it is the most direct test that two temporal modes are indistinguishable.

7

Por qué esto es AGEWhy this is AGEHEUR

Ureal = Uideal · Ecoherente  →  identificar E, compensar con piezas ajustables, seguir su derivaidentify E, compensate with tunable parts, track its drift

Un error de acoplador o una deriva térmica no son ruido aleatorio: son errores coherentes, deterministas y por tanto identificables. Cualquier U(2) se sintetiza con un acoplador ajustable y una fase (Reck 1994, Clements 2016), y se pueden compensar componentes imperfectos con ajustes redundantes (Miller 2015). Este laboratorio ensaya esa lógica en 2×2; no reproduce el algoritmo AGE-T.A coupler error or a thermal drift is not random noise: they are coherent, deterministic and therefore identifiable errors. Any U(2) is synthesised with a tunable coupler and one phase (Reck 1994, Clements 2016), and imperfect components can be compensated with redundant tuning (Miller 2015). This lab rehearses that logic in 2×2; it does not reproduce the AGE-T algorithm.

  • Luz monocromática y un solo modo por guía; sin dispersión del acoplador con λ.Monochromatic light and a single mode per waveguide; no coupler dispersion with λ.
  • Sin reflexiones ni cavidades: solo propagación hacia delante.No reflections or cavities: forward propagation only.
  • La temperatura solo actúa sobre la diferencia de longitud ΔL; un brazo térmico distinto no se modela.Temperature acts only through the length difference ΔL; a different thermal arm is not modelled.
  • Los índices SOI son valores típicos aproximados, no un PDK concreto.SOI indices are approximate typical values, not a specific PDK.
  • En dos fotones, modos temporales idénticos salvo que se compare con fotones distinguibles.For two photons, identical temporal modes unless compared with distinguishable photons.
  • Sin ruido de detección ni estadística finita: las potencias son exactas.No detection noise or finite statistics: powers are exact.
  • Los retos que dependen del azar (detective de pérdidas) eligen la pérdida oculta en cada intento; el registro sellado guarda el circuito, no la solución.Random challenges (loss detective) draw the hidden loss on each attempt; the sealed record stores the circuit, not the solution.